Post 6 : Create ML2 Bootable DVD Media(on Windows)

-
Follow this step if you're setting up ML2 on Windows.

Insert your dual-layer DVD into Windows, and open Transmac.
Click File -> Open Disk Image. In the Windows Explorer window that pops up, select your downloaded ML2 disk image(Will provide download link later )See picture























Your ML2 disk image will pop up in the left sidebar of the TransMac window.
Right-click on it, and click "Burn to CD/DVD". Then burn the disk image . See Picture























- This process may take up to an hour (or more, depending on the speed of your
DVD burner). Once TransMac finishes, you will have a fully bootable DVD version
of the Mountain Lion installer.
Location: India

Comments

Post a Comment

Popular posts from this blog

Post 8 : Boot Into Mountain Lion 10.8.2

-
Plug in your ML2 usb drive in usb 2.0 port of your system(usb 3.0 don't always work) OR Insert your ML2 DVD media in DVD Drive. Restart Your System.If all goes well, your system will boot into ML2  instead of booting from normal hard drive. You will then be able to watch the Mac OS X menu. If you do not manage to reach the Mac OS X menu, check your motherboard's BIOS settings to make sure that the changes you made in  were properly applied. If they were, but you still cannot boot from ML2, go back to post on  (Creating bootable media if using  Mac or Windows)  and try again with a different USB drive or dual layer DVD. At the Mac OS X menu, select the name of your ML2 USB drive/DVD, by using the left/right arrow keys on your keyboard, and then press the enter key (or return key) to start the OS X Mountain Lion installer. In the worst case scenarios, instead of loading the Mac OS X installer, you may end up at a dark gray screen that tells you to rest...
Read more

Post 3: Before Installation

-
- BIOS settings: - Set your BIOS to its default settings. - Execute Disable bit: Enabled - XD (if exists): Enabled - Limit CPUID Max: Disabled - Set all cores of the CPU active/enabled. - Virtualization (if exists): Enabled or Disabled, try it. - Hyper-threading: Enabled or Disabled, try it. - HPET (High Precision Event Timer/PCH): Enabled - SATA Mode: AHCI - Set all the Overclock/Performance/Turbo etc. values to Auto. - Set the UEFI mode settings (if exists) to compatible mode Boot Device - If you're using an ML2 USB drive , change the boot device of your computer so that "USB-HDD" is first. If you're using an ML2 DVD , change "CDROM" to first. You need to do this for ML2 to boot. After you finish installing Mac OS X, you should change this setting back to default, so that "Hard Disk" is the first boot device (this optional, but it will speed up your boot times) HPET - Change this to 64-bit SATA Control Mode (your BIOS mi...
Read more

Post 1: Requirements To Install Mac OS x on non Mac system

-
1) A dual layer DVD[if  you want to make it bootable using windows] 2) An 8 GB Pendrive[ if  you want to make it bootable using mac ] 3) 2 GB Ram on your system[1 gb may also work, try yourself] 4)60 GB free space on your system[ you can make a seperate drive also,preferably if yo want to work on your Mac OS x consistently ] 5)Core 2 duo processors or heigher for efficient performance 6)Some 5 GB Downloads[will provide link later] 7)If installed on seprate drive , you can also boot into your already installed  other OS, you have to choose option while booting everytime 8)If you are logged in to your Mac OS x, your wifi and lan port may not work , so you will not be able to connect with Internet.While they will work well in already  installed other OS. 9) In Order to connect with Internet You have to use a dongle or you can also use mobile tethring feature on your mobile if present{data cable connection b/w mobile and system's usb} 10) Leave any Fea...
Read more